Engine Maximum Gross Power 55.7 kW Engine Model Cat C2.8* Maximum Engine Speed ​​2,550 rpm Maximum Gross Power - Max. Engine Speed ​​2,400 rpm Maximum Gross Power - SAE J1995 55.7 kW Maximum Gross Power - ISO 14396 55.4 kW Maximum Gross Power - ISO 14396 (metric) 75.3 mhp Maximum Net Power - Max. Engine Speed ​​2,400 rpm Maximum Net Power - SAE J1349 54.2 kW Maximum Net Power - ISO 9249 53.8 kW Maximum Net Power - 2,400 rpm - ISO 9249 (metric) 73.1 mhp Maximum Gross Torque - SAE J1995 300 N m Maximum Gross Torque - ISO 14396 300 N m Maximum Net Torque - SAE J1349 296 N m Maximum Net Torque - ISO 9249 295 N m Displacement 2.8 l Bore Bore 90 mm Stroke 110 mm Note Power declared is tested in accordance with the specified standard in effect at the time of manufacture. Note (1) Net power declared is the power available at the flywheel. Note (2) Two Cat C2.8 engine emissions options are available: 1) Meeting U.S. EPA Tier 4 Final, EU Stage V emission standards. 2) Meeting U.S. EPA Tier 3 and EU Stage IIIA equivalent emission standards. Tier 3 engine specifications: 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp more net power (SAE J1349), and 1 N·m/0.7 lb-ft more gross torque (SAE J1995). Note (3) Maximum gross and net torque measured at 1,600 rpm. Weights Operating Weight 5730 kg Buckets Bucket Capacities 0.75-1.55 m³ (1.0-2.0 yd³) Bucket Capacities - General Purpose 0.80-1.35 m³ (1.0-1.7 yd³) Bucket Capacities - Light Material 1.25-1.55 m³ (1.6-2.0 yd³) Multi-Purpose 0.75-1.1 m³ (1.0-1.4 yd³) Note: Bucket selection should be made considering the material density and application to maintain machine stability within the tipping loads specified for each model and configuration. Note (1) Bucket capacities stated include BOCE in accordance with ISO 7546. Sustainability Recyclability 93% Service Fill Capacities Fuel Tank 70 l Cooling System 12 l Engine Crankcase 8.8 l Axles - Front Center Differential 8.8 l Axles - Rear Center Differential 8.8 l Hydraulic System - Including Tank 67.5 l Hydraulic Tank 44.6 l Transmission 2.4 l Note: Diesel Exhaust Fluid (DEF) is not required with engines of this size. Axles Front Fixed (standard) Locking Differential (optional) Rear Fixed (standard) Locking Differential (optional) Note: ±11 degrees of oscillation between the rear and front frames via the tow ball. Steering Steering Articulation Angle - 39° Each Direction Maximum Flow - Steering Pump 46.7 l/min Maximum Working Pressure - Steering Pump 23000 kPa Steering Cycle Times - (full left to full right) - 2.8 sec at High Idle Steering Wheel Turns - 3.25 turns or 4.00 turns from full left to full right or full right to full left Transmission Forward and Reverse - Creep Speed ​​Range# 10 km/h Forward and Reverse - Speed ​​Range 1* 10 km/h Forward and Reverse - Speed ​​Range 2** - High Speed ​​17 km/h Forward and Reverse - Speed ​​Range 2** - Standard 20 km/h Forward and Reverse - Speed ​​Range 3*** 40 km/h Note: The factory default is shown, which can be set to any speed up to a maximum of 19 km/h (12 mph).

Note (1) *The creep function is not available in this gear or higher.

Note (2) **Maximum speed depends on model and configuration (standard or high-range transmission).

Note (3) ***Reverse value is 30 km/h (19 mph). Tires Tire Size - Standard *405/70 R18 SPT9 Tire Size - Optional 405/70 R18 Powerloads Tire Size - Optional (1) 340/80 R18 XMCL/Bibload Tire Size - Optional (2) 340/80 R18 TRI 2 Tire Size - Optional (3) 40X14-20 TL, SM/TR Tire Size - Optional 4 340/80 R18 Duraforce Note *This tire is used for all dimension, balance, and performance data. Note (1) Other tire options are available. Contact your Cat dealer for details. Note (2) In some applications, the loader's productivity may exceed the tire's metric tonne-km/h (metric tonne-mile-h) specifications. Note (3) Caterpillar recommends consulting a tire supplier to evaluate all conditions before selecting a tire model. Cab ROPS ISO 3471:2008 FOPS ISO 3449:2005 Level II Note (1) The canopy and cab Roll-Over Protective Structures (ROPS) are available worldwide. The canopy is not available in the EU. Note (3) *Measurements were carried out with the cab doors and windows closed. Note (4) The labeled sound power level for configurations bearing the CE mark is 101 dB(A) when measured according to the test procedure and conditions defined in 2000/14/EC. A 99 dB(A) Low Noise Level Option is available. Note (2) When properly installed and maintained, the declared dynamic operator sound pressure level in accordance with ISO 6396:2008* procedures is 71 dB(A). Loader Hydraulic System Main Safety - 1st Auxiliary (3rd part) 23500 kPa Main Safety - 1st Auxiliary (3rd part) - Standard Flow* 80 l/min. Main Safety - 1st Auxiliary (3rd part) - High Flow* 120 l/min. Main Safety - 2nd Auxiliary (4th part) 23500 kPa Main Safety - 2nd Auxiliary (4th part) - Flow 45 l/min. Hydraulic Cycle Time - Extend Back 2.2 sec. Hydraulic Cycle Time - Lift 5 sec.